eff. vs load (5v in ) input 26 technical specifications the iws series converters offer excellent regulation and isolation in the industry standard 1 x 2 package. available in several input versions, the iws is perfect for industrial, datacom, or telecom applications. the iws features shortcircuit protection, and 500vdc of isolation. several output voltages are available, please see the iwd series for dual output applications. ? industry standard package ? industry standard pin out ? 85c case operation ? short circuit protection ? 5v and 12v inputs ? input pi filter and 6 side shielding ? wide input voltage range ? 500v isolation switching frequency 300 khz isolation input - output 500 vdc input - case 500 vdc output - case 500 vdc isolation resistance - input to output 10 9 ohms standard case operating range -25 to + 85c industrial range (add -i to p/n) -40 to +85c storage range -40 to + 125c humidity max, non-condensing 95% vibration, 3 axes, 5 min each 5 g, 10-55 hz safety consult factory weight (approx.) 1.4 oz. setpoint accuracy 1% line regulation v in min. - v in max., i out rated 0.5% vo load regulation i out min. - i out max., v in nom. 1.0% vo minimum output current 10 % dynamic regulation, loadstep 25% io pk deviation 1% vo settling time 500 u s temperature coefficient 0.02%/c ripple and noise, 20 mhz bw 1% v out nom. short circuit protection 1 continuous current limit 130% voltage range 5vdc nominal 4.50 - 9.00 vdc 12vdc nominal 9.00 - 18.00 vdc 24vdc nominal 18.00 - 36.00 vdc 48 vdc nominal 36.00 - 72.00 vdc reflected ripple 20% i in max. reverse input current 100% i in max. key features iws series output general 1 continuous short circuit protection is provided. long term continuous operation in this mode is not recommended. converter will auto-restart once fault has been removed specifications typically at 25 c, normal line, and full load - unless otherwise stated. specifications subject to change without notice. n o t e s 888-ipd conv erter www.ipdconverters.com 4 7 3 2 6 6 8 single 10 watt eff. vs load (12v in )
single 10 watt * max input current at minimum input voltage, maximum rated output power ** at nominal v in , rated output models mechanical drawing 27 (millimeters) (millimeters) (millimeters) (millimeters) (millimeters) .x 1.0 .xx .25 .05 888-ipd conv erter www.ipdconverters.com 4 7 3 2 6 6 8 thermal impedance natural convection 15.4 c/w 100 lfm 12.2 c/w 200 lfm 9.3 c/w 300 lfm 7.4 c/w 400 lfm 6.4 c/w tolerances (unless otherwise specified) inches inches inches inches inches .xx .040 .xxx .010 pin: pin: pin: pin: pin: .002 pin function 1+v in 2-v in 3+ v out 4 no pin 5- v out ? .040 (1.02) .18 min. (4.6) .40 (10.16) .800 (20.32) 5 3 2 1 .800 (20.32) 2.00 (50.8) .200 (5.08) 1.00 (25.4) bottom view 4 5 5 5 5 5 5 12 12 12 12 12 12 24 24 48 48 4.5 - 9.0 4.5 - 9.0 4.5 - 9.0 4.5 - 9.0 4.5 - 9.0 4.5 - 9.0 9.0 - 18.0 9.0 - 18.0 9.0 - 18.0 9.0 - 18.0 9.0 - 18.0 9.0 - 18.0 18.0 - 36.0 18.0 - 36.0 36.0 - 72.0 36.0 - 72.0 3.65 3.20 3.70 3.45 3.60 3.55 1.80 1.60 1.80 1.65 1.75 1.75 0.95 0.90 0.45 0.45 3.3 5 12 15 24 48 3.3 5 12 15 24 48 24 48 24 48 3.30 2.00 1.00 0.75 0.50 0.25 3.30 2.00 1.00 0.75 0.50 0.25 0.50 0.25 0.50 0.25 100 100 120 150 240 480 100 100 120 150 240 480 240 480 240 480 74% 78% 80% 82% 83% 84% 75% 80% 82% 84% 85% 86% 85% 86% 85% 89% iws503.3 iws505 iws512 iws515 iws524 iws548 iws1203.3 iws1205 iws1212 iws1215 iws1224 iws1248 iws2424 iws2448 iws4824 iws4848 v in v in range i in max. * v out i out rated ripple & noise efficiency model (volts) (volts) (amps) (volts) (amps) pk-pk (mv) typ.** thermal impedance data is dependant on many environmental factors. the exact thermal performance should be validated for specific application.
|
